
The Antfield Temperature Sensor Module is designed toprovide accurate, real-time temperature monitoring for robotic motors,batteries, power electronics and mechanical assemblies.
The module uses a stainless-steel temperature probecontaining an NTC thermistor or RTD sensing element. The probe detectstemperature changes at the measurement point, while the PCB conditions, filtersand converts the sensor signal for transmission to the robot controller.
In a robot joint, the probe can be installed close to themotor windings, bearings, housing or motor driver. Continuous temperaturefeedback helps the controller identify abnormal heat, adjust the motor load,activate cooling, reduce output power or stop the system before permanentdamage occurs.
Temperature range, sensing element, probe dimensions, cablelength, accuracy, response time, output signal and communication interface canbe customized according to project requirements.
Main Functions
Real-time temperature measurement
Motor-winding temperature monitoring
Battery temperature monitoring
Motor-driver and power-device monitoring
Bearing and gearbox temperature monitoring
Overtemperature warning
Thermal shutdown support
Cooling-system control
Load derating based on temperature
Abnormal-temperature detection
Predictive-maintenance support
Applications
Humanoid robot joints
Industrial robotic arms
Servo motors and actuators
AGV and AMR drive systems
Robot batteries and BMS
Motor-control and power-driver PCBs
Robot gearboxes and bearings
Charging systems
Robot cooling systems
Medical and service robots
Outdoor inspection robots
Main Components
Component | Function |
Temperature Probe | Provides direct thermal contact with the motor, battery, bearing or other measurement surface. |
NTC Thermistor or RTD Element | Changes its electrical resistance according to temperature. It is normally located inside the metal probe. |
Stainless-Steel Probe Housing | Protects the sensing element and provides reliable mechanical and thermal contact. |
Heat-Resistant Wires | Connect the remote probe to the PCB while supporting installation near motors and other heat-generating components. |
Signal-Conditioning Circuit | Amplifies and filters the sensor signal to improve measurement stability. |
Precision ADC | Converts the analog temperature signal into digital data when required. |
Controller IC—Optional | Performs linearization, calibration, alarm processing and communication management. |
Voltage Regulator | Supplies stable operating voltage to the measurement and processing circuits. |
Precision Resistors | Form the measurement circuit and help determine temperature accuracy. |
Filter Capacitors | Reduce electrical noise from motors, inverters and switching power circuits. |
Protection Components | Help protect against ESD, reverse polarity, voltage transients and wiring faults. |
Output Connector | Connects power, temperature data and communication signals to the robot controller. |
PCB and Mounting Holes | Provide electrical connections and secure mechanical installation. |
Temperature-Sensing Options
Sensor Type | Main Characteristics | Typical Robotic Use |
NTC Thermistor | Compact, sensitive and cost-effective | Motors, batteries and general overtemperature protection |
RTD Sensor | High accuracy, stability and repeatability | Precision motor, bearing and industrial temperature measurement |
Thermocouple | Supports a wide and high temperature range | High-temperature motors, heaters and industrial equipment |
Digital Temperature IC | Provides calibrated digital output | PCB, controller and electronics temperature monitoring |
The generated product image represents an NTC orRTD probe-based temperature sensor module.
Communication and Output Options
Depending on the selected configuration, the module cansupport:
Main Advantages
Fast and stable temperature feedback
Remote metal probe for flexible installation
Suitable for motors, batteries and power electronics
Helps prevent thermal damage
Supports closed-loop cooling control
Compact and easy to integrate
Resistant to electrical noise when properly designed
Customizable probe, cable and interface options