Key Features
High-bandwidth sensor and video transport
Industrial real-time protocol support
Galvanic isolation through magnetics
Remote diagnostics and system integration
Typical Electronic Components
Ethernet PHY/switch; magnetics; RJ45 or industrial connector; oscillator; ESD array; common-mode choke; PoE circuitry if required.
Reference PCB and PCBA Parameters
Reference item | Typical guidance |
Typical layers | 4-10 layers |
Differential impedance | 100 ohm nominal |
Interfaces | 100BASE-TX, 1000BASE-T, 2.5GbE or application-specific |
Protocols | Standard Ethernet, EtherCAT or other industrial protocols |
Key processes | Impedance control and length matching |
Testing | TDR coupon, link, throughput and packet-error test |
Manufacturing and Engineering Priorities
Maintain differential pair geometry and continuous reference planes.
Minimize discontinuities through connectors, vias and layer transitions.
Place magnetics and protection according to PHY and connector guidance.
Separate high-speed clocks and pairs from motor-switching noise.
Design and Commercial Cautions
Industrial Ethernet protocol support depends on controller hardware and software. PoE power class and thermal design must be explicitly defined. Specify cable category, length and connector environment.
|
Applications
Machine-vision robots, industrial robots, AMRs and humanoid platforms.